4.9 from 179 Google reviews(03) 9434 7677

What the ACCS rating on a carpet sample actually means

The ACCS star rating on the back of a carpet sample tells you how well it holds up to foot traffic. Here is how to read it.

Choosing a floor5 minute readDiamond Valley Carpets, Greensborough

The ACCS rating is a star grade on the back of most carpet samples sold in Australia. It tells you how well the carpet keeps its appearance under foot traffic. Residential carpets are graded from one to six stars, from light duty up to extra heavy duty. More stars means the carpet suits busier parts of the house, including hallways and stairs.

It is the most useful bit of information on a sample, and most people never turn it over.

Who runs the scheme

ACCS stands for the Australian Carpet Classification Scheme. It is run by the Carpet Institute of Australia and has been around since the mid 1980s. Carpet makers who join the scheme send their products for independent lab testing. A panel then looks at the results and assigns a grade.

The grade is based mainly on appearance retention. In plain terms: how well the carpet keeps looking the way it did on day one after years of being walked on. That covers things like the pile flattening, the texture changing, and traffic lanes showing.

Reading the residential stars

Residential carpets use a six star scale grouped into four duty levels.

Stars Duty level Typical rooms
1 Light duty Rooms that barely get walked on, such as a spare bedroom
2 Medium duty Bedrooms, a formal lounge that is not used every day
3 to 4 Heavy duty Family rooms, hallways, stairs, main living areas
5 to 6 Extra heavy duty The busiest homes: big families, pets, high traffic hallways

A few practical points:

  • Match the rating to the busiest room. If the same carpet is going through the whole house, rate it for the hallway, not the bedrooms.
  • Higher is not always necessary. A six star carpet in a guest room is money spent on wear you will never use. Bedrooms are usually fine at two or three stars.
  • Stairs need at least heavy duty. The label also shows whether the carpet is suitable for stairs. If it does not say so, do not put it on stairs.

Commercial carpet uses a different scale

Carpets made for offices, schools, shops and other workplaces are graded on a separate four star contract scale, set by how heavy the commercial foot traffic is. A carpet rated for a quiet private office will not hold up in a school corridor or a busy reception. Some carpets carry both a residential and a contract grade.

If you are choosing carpet tiles for an office or school, the contract grade is the one to look at. We go through that in carpet tiles for offices and schools.

What the rating does not tell you

The stars are about wear and appearance. They do not tell you:

  • How soft it feels. A dense, hard wearing carpet can feel firmer than a softer, lower rated plush.
  • How it handles stains. That comes down to the fibre. Solution-dyed nylon and polypropylene resist stains far better than wool or standard nylon. Our guide to carpet fibres covers this.
  • How it copes with sun. Fade resistance is also mostly about the fibre.
  • How it handles office chairs. Chairs on castor wheels are treated as severe use. The scheme notes that carpet under castor chairs may not perform to its grade without a chair mat, and warranties usually exclude castor damage. Put a mat under the desk chair in the home office.

Why two similar carpets can rate differently

Two carpets can look almost identical on the showroom floor and still carry different grades. The difference is usually in what you cannot see at a glance: how many tufts are packed into each square centimetre, how tightly the yarn is twisted, and how much fibre sits in each square metre. Denser carpet with a tighter twist holds its shape longer, so it tends to rate higher.

Ratings and warranties

Makers in the scheme can warrant their carpet to perform to its ACCS grade, as long as it is laid and looked after properly. In practice that means:

  • the right underlay for the carpet
  • professional installation
  • regular vacuuming
  • the cleaning and care steps in the warranty booklet

Keep your invoice and any professional cleaning receipts. If you ever need to make a claim, the first questions will be about how the carpet was laid and cleaned.

A simple checklist for the showroom

When you find a carpet you like, flip the sample over and look for:

  1. The ACCS label and its star grade.
  2. Whether it is marked suitable for stairs (if that matters to you).
  3. The fibre type.
  4. The warranty length and what it covers.

If any of those are missing from the label, ask. A good carpet store can tell you straight away.

Bring your floor plan

Tell us which rooms the carpet is going in and who lives in the house, and we will point you to carpets with the right rating, without over-specifying the bedrooms. Visit the showroom at 19 Sherbourne Road, Greensborough, look through our carpet range, or call (03) 9434 7677.

Common questions

What does ACCS stand for?
The Australian Carpet Classification Scheme. It is run by the Carpet Institute of Australia and grades carpets on how well they keep their appearance under foot traffic.
How many stars should my carpet have?
For bedrooms, two or three stars is usually enough. For hallways, family rooms and stairs, look for at least three stars (heavy duty), and four to six stars if the house is very busy.
Can any carpet go on stairs?
No. Stair carpet should be rated at least heavy duty and the label should show it as suitable for stairs. Stairs take the hardest wear of any spot in a house.

Tell us about the rooms and we'll email you pricing.

Leave a few details, or email your floor plans to enquiry@diamondvalleycarpets.com.au, and we'll send pricing options across different grades to suit your budget. Or ring us now and talk it through.

  1. We email your pricing. We send pricing options across different grades, based on your floor plans or measurements.
  2. You choose. Visit the showroom to see the colours in person, and borrow our large samples to try at home.
  3. Final measure and install. Steve visits to take the final measurements, then our own team installs your new floor.

Call (03) 9434 7677 Email us

Please tell us your name.

We email your pricing options, so we need an email address.

Please add a phone number in case we have a question.

Which suburb is the job in?

What are you after? Pick any

We'll email you pricing options. Have a floor plan? Email it to enquiry@diamondvalleycarpets.com.au. Prefer to talk now? (03) 9434 7677